Engr. Abdurrahman Ismail OMOAKHALEN

Department: Mechatronics Engineering Technology

Designation: Lecturer

Office: @ the School of Engineering Technology

Contact:

Tel: +2348061649563

Email: omoabdul01@auchipoly.edu.ng

LinkedIn

 

 

About MeQualificationsProfessional MembershipExpertiseResearch InterestSelected Publications

Engr. Abdurrahman Ismail OMOAKHALEN is the Head of Department, Mechatronics Engineering Technology. He hails from Ewu, Esan Central Local Government of Edo State.

Engr. A. I. OMOAKHALEN was awarded a Masters Degree in Industrial Engineering from the University of Benin, Benin City in 2014 and Bachelor of Engineering Degree in Materials and Production Engineering from the Ambrose Alli University, Ekpoma Edo State Nigeria in 2007.

He is a lecturer in the Department of Mechatronics Engineering Technology, Auchi Polytechnic, Auchi and has over 40 both International and Local Academic Conferences/Journal publications.

He is a registered engineer of the Council for the Regulation of Engineering Practice in Nigeria (COREN), a Corporate Member of the Nigerian Society of Engineers (NSE), a member of the Nigerian Institution of Mechanical Engineers (NIMechE), a member of the International Association of Engineers (MIAENG) among others.

He has held some administrative and professional positions among them are: Assistant Technical Secretary, Treasure and Vice Chairman, Nigerian Society of Engineers, Auchi Branch.

M. ENG. Industrial Engineering
B.ENG. (Hons) Materials and Production Engineering

Registered Engineer, Council for the Regulation of Engineering in Nigeria (COREN)
Member, Nigerian Society of Engineers (MNSE)
Member, Nigerian Institution of Mechanical Engineers (MNImechE)
Member, International Association of Engineers (MIAENG)

Provision of technical, diagnostics and problem resolutions in devices, systems, processes etc.

Human-Robot Collaboration in Manufacturing Environments
Development of Smart Manufacturing Tools
Internet of Things (IoT) for Smart Production
Human Factors Engineering in Workplace Design
Optimization of Material Handling Systems in Industries/Organizations
Implementation of Total Productive Maintenance (TPM) in Industries/Organizations

Journal & Papers

1. Y. Olotu, F. A. Aigbodioh, A. I. Omoakhalen, A. S. Ososomi “Utilization and Integration of Renewable Energy in the Construction of Buildings” International Journal of Electronics and Electrical Engineering Systems (ISSN: 2602-7437) Volume 7, Issue 1 (March 2024)
2. Musa, N. A., Okegbile, O.J., Muhammadu, M.M., Omoakhalen A. I., Iyaogeh J., Major P and Zubair A.M. “Determination of Sound Level of Prototype Engine for Generation of Power from Exhaust Gas of Gasoline Generator” International Journal of Innovative Engineering, Technology and Science ISSN: 2533-7365 Vol. 7, No.1, December, 2023
3. B. N. G. Aliemeke, H. A. Okwudibe, A. I. Omoakhalen, and P. Major “Box-Behnken Optimization of Pin-On-Disc Wear Test Process Parameters” Nigerian Journal of Technology (NIJOTECH) Vol. 42, No. 4, December, 2023, pp.464 – 471 www.nijotech.com Print ISSN: 0331-8443 Electronic ISSN: 2467-8821 https://doi.org/10.4314/njt.v42i4.6
4. Zubair A. M., Musa N. A., Omoakhalen A. I., Iyaogeh J. and Major P. (2023). “Determination of Emissions from Prototype Engine for Generation of Power from Exhaust Gas of Gasoline Generator” FUDMA Journal of Science (FJS) ISSN online: 2616-1370, ISSN print: 2645-2944, Vol. 7 No. 5, October, 2023, pp 176 – 180. DOI: https://doi.org/10.33003/fjs-2023-0705-2010
5. Zubair A. M., Musa N. A., Omoakhalen A. I., Iyaogeh J. and Major P. (2023). “Estimation of Prototype Engine Backpressure for Power Generation from Gasoline Generator Exhaust Gas” Journal of Engineering for Development. Vol. 15(3), September (2023) pp. 75 – 84. https://jedev.com.ng/.
6. Musa N. A., Omoakhalen A. I., Iyaogeh J. and Major P. (2023). “Design and Construction of a Prototype Engine for Generation of Power from Exhaust Gas of Gasoline Generator” Uniport Journal of Engineering and Scientific Research (UJESR) Vol. 7, Issue 1, 2023, Page 85 – 94 ISSN: 2616-1192 (www.ujesr.org), March 2023)
7. Olotu Y., A. I. Omoakhalen, R. Ishiekwene, S. K. Abolaji, P. A. Imanogor (2023). “Evaluation of the Effect of Solar Radiation on Photovoltaic Cell Performance” International Journal of Electronics and Electrical Engineering Systems (ISSN: 2602-7437) Volume 6, Issue 1 (March 2023).
8. Akhigbe A. E., Aliemeke B. N. G., Ehibor O. G. and Omoakhalen A. I. (2022). “Development and Material Optimization of 0.67HP Petrol Generator Cylinder Block Using Taguchi Design and Finite Element Analysis” Journal of Information Engineering and Applications www.iiste.org ISSN: 2224-5782 (print) ISSN 2225 – 0506 (online) Vol. 12, No. 1, 2022.
9. Olotu Y., Okodugha D. A., Adoga E.A, Ikhide, O, Omoakhalen A. I. & Olaiya S (2022). “Estimation Models for Computing Egusi-Melon Crop Water Reguirements” European Journal of Advances in Engineering and Technology, 2022, 9(5):39-45. ISSN:2394-658X
10. Bada, A. O., Olotu Y., Omoakhalen A. I., Momoh, S. & Ewah, K.A (2022). “Assessment of Safe-drinking Water in Auchi, Nigeria” Journal of Scientific and Engineering Research, 2022, 9(4):150-158. ISSN: 2394-2630.

11. Aliemeke B.N.G, Okwudibe H. A., Omoakhalen A. I. & Dirisu B. (2024) “Design and Construction of a Screw Flight Bending Machine” Paper presented at the 2024 Annual School of Engineering Conference & Exhibition (ASEC), Auchi Polytechnic, Auchi. From 7th – 9th May, 2024
12. Omoakhalen A. I., H. A. Okwudibe and B.N.G. Aliemeke (2023) “Product Development and Manufacturing in the Nigerian Industrial Sector” Paper presented at the 2023 National Engineering Conference and Annual General Meeting of the Nigerian Society of Engineers (NSE) “Abuja 2023” from 27th – 1st December, 2023.
13. Olotu Y, Omoakhalen A. I., Ikhazuagbe O, and Ishiekwene R. (2023) “Natural Gas for Automotive Power and Emission Reduction in Nigeria” Paper presented at the 2023 SEET Annual Conference, School of Engineering and Technology, Federal University of Technology Akure, Ondo State, Nigeria. 7th – 9th November, 2023.
14. Umar A. I., Omoakhalen A. I. and Oshawo E. I. (2023) “Welding Procedure Specification Using Concurrent Engineering to Improve Design Integrity” Paper presented at the 3rd International Engineering Conference of the School of Engineering Technology (IEC 2023), Auchi Polytechnic, Auchi. from 9th – 12th May, 2023
15. Sekiteri P. A., Oshawo E. I., Omoakhalen A. I. and Ajayi P. R. (2023) “Design of a Laboratory-Scale Anaerobic Biodigester for Carbon Footprint Reduction and Welding Procedure Specification Using Concurrent Engineering to Improve Design Integrity” Paper presented at the 3rd International Engineering Conference of the School of Engineering Technology (IEC 2023), Auchi Polytechnic, Auchi. from 9th – 12th May, 2023
16. Aliemeke B.N.G, Ehibor O. G, & Omoakhalen A. I. (2022) “Optimization of Technological Based Communication Parameters for Advancing of Nation Building” Paper presented at the National Engineering Conference and Annual General Meeting of the Nigerian Society of Engineers (NSE) “Abuja 2022” from 14th – 18th November, 2022